top of page
Electric motor stator under assembly_edited.jpg

Syrian Coil Co.

LEADER IN THE FIELD OF COIL MANUFACTURING UP TO THE COMPLETE REPAIR OF LV AND HV ELECTROMOTORS, GENERATORS AND TRANSFORMERS

Products & Services

S.C.C. consists of several specialized departments that work together to achieve the company's goals, from the precise calculation of time and costs for the tender to the recommissioning of the repaired machine, with a focus on stock management to ensure availability of materials, with particular attention to proper storage and specific lifetimes of materials.
Supervision of the work under strict application of the company's quality assurance regulations.
Complete repair of electrical machines using Rich Resin and VPI technologies and performing NDT tests and mechanical repairs up to dynamic balancing. 
Step-by-step performance of all necessary electrical tests in accordance with EASA, IEC and the customer's technical conditions.

Abstract blur car garage automobile interior. Blurred mechanic service centre auto repair

1

Design & Manufacture of Coils

The workshop is capable of winding, forming and heat pressing insulated and non-insulated wires to produce complete coils for end use. The original specifications in terms of insulation class and material specifications are considered minimum requirements

2

LV & HV Motors & Generator Repair

By the end of 2008, more than 320 motors with outputs of 250 to 3350 kW and 30 generators with outputs of up to 6500 kVA and voltages of up to 10.5 kV had been repaired here. AC, DC, flame-proof and explosion-proof motors and generators are completely overhauled to their original performance and protection class

3

Transformers

Transformer general maintenance: S.C.C. has executed general overhauling of transformers with capacities up to 145 MVA. This included test and inspection of the protection devices following international norms and replacements whenever necessary.

On special request, S.C.C. has manufactured special transformers, such as excitation

4

Variable Power Supply Units

At the beginning of 2009, SC completed the manufacture of a motor-driven 3-phase power supply unit with 1000 kVA. The variable transformer and its housing were manufactured entirely in SC's workshops using VPI technology. This device has an input of 0-400 V transformer, output voltage from 0.05 to 11.5 kV. The voltage varies evenly in small taps and without interruption

5

Modifications

In coordination with the customer, S.C.C. in certain cases conducts new calculation and redesign of the machine in repair. The use of modern insulation materials results in many cases in the improvement of the machine's performance, adding to output and lifecycle 

6

Dynamic Balancing

AIL's rotating machines are dynamically balanced before they leave the S.C.C. workshop. The workshop is prepared for balancing rotors with a length of up to 3.5 m, a diameter of 1.2 m and a weight of 3.5 tonnes. At the customer's request, S.C.C. carried out the balancing of a rotor of a 28 MVA generator at full speed on site

ABOUT
architecture and equipment of a factory for mechanical engineering_ assembly of electric m

About

Founded in 1989, Syrian Coil Company is the leading Syrian company for quality repairs and rewinding of low and medium voltage motors, generators and medium power transformers as well as general overhauls of all capacities

 

Over the past three decades, we have successfully carried out repairs/rewindings/re-insulations/redesigns and modifications of windings of high and medium voltage motors (up to 6.6 KV, 2500 kW, and 11 KV, 1000 kW), general overhauls of generators (up to 10.5 KV, 28 MVA) and power transformers (up to 230 KV, 125 MVA)

After specializing in electrical power engineering and graduating from the Higher Industrial Institute in Egypt in 1970, Mahmoud worked in many fields in his native Syria, particularly in the power plants of the oil fields

In the early nineties of the last century, he decided to embark on the adventure of investing in knowledge and technology using his own capital

He decided to enter the field of manufacturing and repairing medium and high voltage motors and transformer coils after learning that all this equipment was either sent to Europe or replaced by new ones. This was a technical and national challenge that he couldn't resist

Together with his brothers and friends, he started his project, which relied on local and home-made machines to learn more and, of course, save money

The company started working in 1993 under difficult conditions and became a pioneer in its field in Syria and the neighborhood.

He died at the end of 2009, leaving his knowledge, spirit and courage to innovate to his partners and heirs

Eng. Mahmoud Doghmosh

28/11/1948 - 3/12/2009

CO-Founder

CONTACT

CONTACT

Contact Us

Thanks for submitting!

Head Office

100 St. MRF Building A2,

Floor 14, Office 53,

Irbil, Iraq

Tel: +964 751 233 8084

Syrian Branch

Shaba'a St, Mheha

Damascus, Syria

Tel: +963 933 277 633

Czech Branch

Ivana Olbrachta 1908,

Nymburk 288 02,

Czech Republic

Tel: +420 778 486 777

bottom of page